Items where Year is 2008

Ab. Kadir, Shamimi (2008) CleverSecure ONLINE System. [Final Year Project] (Unpublished)

Abdul Halim, Rosni (2008) RESPONSES OF OTRC CLASSIC SPAR SUBJECTED TO RANDOM. [Final Year Project] (Unpublished)

Abdul Jalil, Muhammad Bukhari (2008) Freezing Point Depression Method for Hydrate Monitoring. [Final Year Project] (Unpublished)

Abdullah, Muhamad Safrizal (2008) THE EFFECT OF POLYVINYL ALCOHOL (PVA) FffiER TO THE TENSILE STRENGTH OF CONCRETE. [Final Year Project] (Unpublished)

Abusman, Nor Azian (2008) The effect of Microwave Incinerated Rice Husk Ash on foamed mortar. [Final Year Project] (Unpublished)

Ahmad, Farooq (2008) Studies Separation of Gas Mixtures by Membrane. PhD. thesis, Universiti Teknologi Petronas.

Ahmad, Zarizambri (2008) Design and Analysis of a Pedal Box System for a small Race-car. [Final Year Project] (Unpublished)

Amaruddin, Haslin Idayu (2008) Possibility of Stabilizing Peat Soil Using Electroosmotic Method. [Final Year Project] (Unpublished)

Arif, Muharnad Fatikul (2008) Mechanical and Water Absorption Properties of Oil Palm Empty Fruit Bunch-High Density Polyethylene Composites. Masters thesis, Universiti Teknologi Petronas.

Awi, Azree Azhar (2008) STUDY OF CONCRETE FRACTURE SLl\iULA T!ON USING ANSYS. [Final Year Project] (Unpublished)

Azman, Nur Syahinaz (2008) Further Treatment of Fertilizer Wastewater by Phytoremediation. [Final Year Project] (Unpublished)

Elhadi, Mazin (2008) Biologically Inspired Self-Healing Software System Architecture. Masters thesis, Universiti Teknologi Petronas.

Fazal, lmran (2008) Haptic Feedback Device for Needle Insertion. Masters thesis, Universiti Teknologi Petronas.

Hashim, Mohd Hafiz (2008) VXML: AN ALTERNATIVE SOLUTION TO ACCESSING WEBSITE'S CONTENTS. [Final Year Project] (Unpublished)

IBRAHIM ABDALLAH, MUNZIR AHME (2008) ANALYSIS OF PRESSURE DROP AND HEAT TRANSFER OF ANNULAR DEPOSITION TEST UNIT. Masters thesis, Universiti Teknologi Petronas.

JAMALUL KARIB, NUR BAITI (2008) HARDWARE IMPLEMENTATION OF A MINIMALLY COMPLEX RFID BASED DATA RETRIEVAL SYSTEM. [Final Year Project] (Unpublished)

LEE , PETER CHEE HONG (2008) DEVELOPING MULTI-DEGREES OF FREEDOM OF DEXTEROUS HUMANOID ROBOTIC HAND. [Final Year Project] (Unpublished)

MOHAMED HAMDAN, MOHAMAD FARID (2008) THE STUDY OF 2D THERMAL DISTRIBUTIONS USING FLUENT SIMULATION PROGRAM FOR PASSIVE SOLAR CONCEPT ' OF LOW RISE. BUILDING. [Final Year Project] (Unpublished)

Masilamani, Mariadas Brian (2008) SIDOARJO MUD AS A CEMENTITIOUS MATERIAL: A MYTH OR REALITY. [Final Year Project] (Unpublished)

Mazalan, Siti Fatimah (2008) Comparative Study of Different C02 Injection Modes for Baronia RV2 Reservoir. [Final Year Project] (Unpublished)

Mohamad Dahalan, Noor Magdelina (2008) FINANCIAL VISUALIZATION APPLICATION ADOPTING BIMODAL VISUALIZATION. [Final Year Project] (Unpublished)

Mohamad Hazli, Mohd Hafiz (2008) COD AND NITROGEN REMOVAL FROM FERTILIZER WASTEWATER EFFLUENT BY USING AN ENGINEERED WETLAND. [Final Year Project] (Unpublished)

Mohamad Rosalan, Mohamad Attirillah (2008) Performance of Used Engine Oil in High Strength Concrete and Behavior of the Structure under Dynamic Loading. [Final Year Project] (Unpublished)

Mohamed Azam Zaki, Durrussaadah (2008) i-Feeder (Intelligent Feeder). [Final Year Project] (Unpublished)

Mohamed Rahim, Nur Aqilah (2008) Pile Selection Methodology. [Final Year Project] (Unpublished)

Mohd, Muhammad Hadfiz (2008) Wave Energy Linear Motor/Generator. [Final Year Project] (Unpublished)

Mohd Ali, Ahmad Fadhil Hafiz (2008) The Enhancement of Micro Grinding Process by Using NdFeB to Seize Material Dust. [Final Year Project] (Unpublished)

Mohd Yusof, Khairun Nadiah (2008) WIRELESS TEMPERATURE MONITORING SYSTEM. [Final Year Project] (Unpublished)

Mohd Yusof, Mohd Shah Rizal (2008) Engine Performance and Exhaust Emission Characteristics of Fuel Oil-Diesel Fuel Mixture in a Single Cylinder Engine. [Final Year Project] (Unpublished)

Muharnad, Dzulkarnain (2008) RE-ENGINEERING OF THE AIR INTAKE MANIFOLD FOR UTP FORMULA CAR. [Final Year Project] (Unpublished)

Nazri, Afdzal (2008) WISE - Wireless Sound Detector. [Final Year Project] (Unpublished)

Ndong , Luis-Casiano Mikue (2008) Study on Pumping System Design for Water Injection. [Final Year Project] (Unpublished)

Othman, Zulkifley (2008) Online Hostel Defect Reporting System. [Final Year Project] (Unpublished)

Permana Sari, Ayu (2008) Effect of Filler Composition on the Performance of Asphaltic Concrete Mixture. Masters thesis, Universiti Teknologi Petronas.

Raja Khairuddin, Raja Syazwani (2008) Online Batik Designing Tool. [Final Year Project] (Unpublished)

Ramli, Mohd Syahmi (2008) Experimental Assessment on Corrosion under Insulation (CUI). [Final Year Project] (Unpublished)

Ramli, Norasyiken (2008) The effect of different aggregate types and grandation on the moisture susceptibility of b. [Final Year Project] (Unpublished)

Ramsah, Mohd Fasya (2008) Characterization and Properties of Nickel Powder and Carbon Powder Mixture. [Final Year Project] (Unpublished)

Rusli, Nurul Masnem Ahza (2008) Design of Table with Adjustable Height. [Final Year Project] (Unpublished)

SARIN, FARHANA (2008) CHAOS BASED BLOCK ENCRYPTOR. [Final Year Project] (Unpublished)

Salehuddin, Nur Husna (2008) Persatuan Seni Silat Cekak Malaysia Universiti Teknologi PETRONAS (PSSCM UTP) Members Management System. [Final Year Project] (Unpublished)

Wan Chek, Mohd Najib (2008) ANALYSIS OF COASTAL EROSION AT MIRI CRUDE OIL TERMINAL. [Final Year Project] (Unpublished)

Y ahaya, Mohd Roziee (2008) Effects of Particle Size on Mechanical Properties of Oil Palm Fruit Bunch Composites. [Final Year Project] (Unpublished)

Zaini, Muhammad Syakir (2008) Quality Control (QC) Process On Pipeline Engineering Geospatial Data. [Final Year Project] (Unpublished)

A

A Rahman, Hamizah (2008) Design of an Explosion Vessel for Study of Flame Propagations. [Final Year Project] (Unpublished)

A. NASR, AMIR AHMAD (2008) BLOGGING ASA MEANS OF KNOWLEDGE SHARING. [Final Year Project] (Unpublished)

AB RAZAK, MOHD ARIFF (2008) PROPERTIES AND UTILIZATION OF JATROPHA CURCAS OIL FOR FORMATION DAMAGE CONTROL. [Final Year Project] (Unpublished)

ABDALLA EL-KHALIF A, ABUBAKR ELAMIN (2008) RESPONSES OF CLASSIC SPAR PLATFORM SUBJECTED TO REGULAR WAVES. [Final Year Project] (Unpublished)

ABDUL KADIR, KHADIJAH (2008) BLUETOOTH-BASED REMOTE MOBILE SURVEILLANCE ROBOT. [Final Year Project] (Unpublished)

ABDUL KARIM, NASHRUL IZZUAN (2008) Removal of Dissolved Reactive Red Dye from Aqueous Solution by Coconut Coir Carbon. [Final Year Project] (Unpublished)

ABDUL MALEK, NOR HAFIZAH (2008) ULTRASOUND AIR BUBBLE DETECTOR FOR MOVING BLOOD (ARTIFICIAL KIDNEY APPLICATION). [Final Year Project] (Unpublished)

ABDULLAH HAZIQ BIN HUSSAIN, ABDULLAH HAZIQ (2008) Virtual Saxophone. [Final Year Project] (Unpublished)

ABDULRHMAN IDRIS, MALIK ABDALLHA OSMAN (2008) OBJECT RECOGNITION BY USING ARTIFICIAL NEURAL NETWORK: Turning point based shape recognition using NN. [Final Year Project] (Unpublished)

ABO HALIM, MOHO ASYRAFI (2008) SEA FORCES ON SUBSEA PIPELINES. [Final Year Project] (Unpublished)

AHMAD ASTOR, AMIR (2008) Solar Photocatalytic Treatment of Pharmaceutical Wastewater. [Final Year Project] (Unpublished)

ALI AZMAN BIN OMAR, ALI AZMAN (2008) INVESTIGATION ON STRESS CONCENTRATION FACTOR OF PIPING BRANCH JUNCTIONS SUBJECTED TO INTERNAL PRESSURE. [Final Year Project] (Unpublished)

ARIFUDDIN, MUHAMMAD NAZRI (2008) DESIGN AND IMPLEMENTATION OF UNMANNED GROUND VEHICLE (MOVEMENT CONTROL). [Final Year Project] (Unpublished)

AWALl, MOHD SHAHRIN (2008) Response spectrum analysis of medium rise buildings subjected To a far-field earthquake. [Final Year Project] (Unpublished)

AWl, AZREE AZHAR (2008) STUDY OF CONCRETE FRACTURE SIMULATION USING ANSYS. [Final Year Project] (Unpublished)

AZHAR, AZWIN (2008) MODELING, SIMULATION AND ANALYSIS OF AN AUTOMOTIVE MANUFACTURING SYSTEM USING ARENA SOFTWARE. [Final Year Project] (Unpublished)

Aaron Ang Kok Wye, Aaron (2008) Design of an Exhaust System For The UTP Formula SAE Race Car. [Final Year Project] (Unpublished)

Ab Karim, Rosnita Binti (2008) Non-Point Sources (NPS) PoUution Modelling and Water Quality Improvement Using Wetland. [Final Year Project] (Unpublished)

Ab Rahim, Mohd Syahrin (2008) implementation of Value Engineering within consulting practice in Malaysia. [Final Year Project] (Unpublished)

Abd Hamid, Alia Hafiza (2008) USE OF RECYCLE FERRIC CHLORIDE EXTRACTED FROM GROUNDWATER TREATMENT PLANT SLUDGE IN THICKENING OF MUNICIPAL SLUDGE AND TREATMENT OF LEACHATE. [Final Year Project] (Unpublished)

Abd Kahar, Amirul Hafiz (2008) Web based Islamic Will (E-Wasiat). [Final Year Project] (Unpublished)

Abd Rahim, Muhamad Farhan (2008) Anaerobic Treatment of Pharmaceutical Wastewater. [Final Year Project] (Unpublished)

Abd Rahim, Muhammad Yusof (2008) Pressure as an Indicator for Water Breakthrough for Horizontal Well Completion. [Final Year Project] (Unpublished)

Abd Rahman, Nurhidayah (2008) Industrialized Building System (IBS): Applicability of Industrialized Floor Systems in Malaysia. [Final Year Project] (Unpublished)

Abd Rahman, Siti Fatimah (2008) Online Sport Booking System. [Final Year Project] (Unpublished)

Abd Rani, Fairuz Effendy (2008) A Portable Augmented Reality Science Laboratory. [Final Year Project] (Unpublished)

Abd, Rahim, Elnadia (2008) UTP e-College System Using AJAX Technology. [Final Year Project] (Unpublished)

Abdelwahid, Mohamed Noureldin (2008) STUCK DRILL PIPE WHILE DRILLING OPERATION. [Final Year Project] (Unpublished)

Abdilah, Mohamad Arif (2008) Effect of Inorganic Compound on the Tensile Strength of Ordinary Portland Cement (OPC) Concrete. [Final Year Project] (Unpublished)

Abdul Halim, Muhammad Hafizi (2008) Electronic Voting System. [Final Year Project] (Unpublished)

Abdul Halim Koh, Abdul Rahman (2008) Failure Investigation of a Steel Pipe. [Final Year Project] (Unpublished)

Abdul Hamid, Hafizan Lutfi (2008) Nitrogen and Phosphorus Removal from Effluent of Sewage Treatment Plant Using Water Lettuce (Pistia stratiotes). [Final Year Project] (Unpublished)

Abdul Hasib, Nur Hazirah (2008) Providing Direction using Sight-Seeing Paradigm. [Final Year Project] (Unpublished)

Abdul Jabar, Nor Fazliana (2008) Vermicomposting of Municipal Sludge Using Eisenia Foetida. [Final Year Project] (Unpublished)

Abdul Rahim, Azhani (2008) MPPUTP Election via SMS. [Final Year Project] (Unpublished)

Abdul Rahman, Abdul Fatah (2008) Removal of Iron from Groundwater by Filtration through Carbonaceous Shale. [Final Year Project] (Unpublished)

Abdul Rahman, Nur Hayati (2008) Compilation of Design Guideline for Piled Raft Foundation. [Final Year Project] (Unpublished)

Abdul Rahman Bin Abdul Halim Koh, Abdul Rahman (2008) Failure Investigation of a Steel Pipe. [Final Year Project] (Unpublished)

Abdul Razak, Mohd Farhan (2008) THE IMPLEMNTATION OF PRE-CAST CONCRETE PANEL SYSTEM FOR HIGH-RISE RESIDENTIAL BUILDING IN MALAYSIA. [Final Year Project] (Unpublished)

Abdul Razak, Rodzleana (2008) Spatial Variability of SoU Engineering Properties at UTP Campus. [Final Year Project] (Unpublished)

Abdul Razak bin Rustami, Abdul Razak (2008) A Study into the Effect of Loading and Sliding Speed to the Tribological Properties of Brake Pad Material. [Final Year Project] (Unpublished)

Abdullah, Azizul (2008) REAL ESTATE VALUE FORECASTING SYSTEM USING DATA MINING AND NEURAL NETWORK APPROACH (REVFOS). [Final Year Project] (Unpublished)

Abu Bakar, Ahmad Ashraf (2008) EFFECT OF GEOGRAPHICAL LOCATION ON THE EFFECTIVENESS OF COUNTDOWN TIMER AT SIGNALIZED INTERSECTIONS. [Final Year Project] (Unpublished)

Abu Hashim, Nor Nadia (2008) Image-based Modeling 2-Dimension to 3-Dimension model. [Final Year Project] (Unpublished)

Abu Hassan, Haneysa (2008) Spatial Variability of Arsenic in Groundwater (Case Study of Bangladesh). [Final Year Project] (Unpublished)

Abu Hassan, Safwan (2008) Online Physics Experiment. [Final Year Project] (Unpublished)

Adeline Ervity Kehing, Adeline (2008) Wave Attenuation by Floating Breakwater. [Final Year Project] (Unpublished)

Adi Akmal Bin Nasrul Hisham, Adi Akmal (2008) Study and Improvement of Drag Coefficient of a Bus. [Final Year Project] (Unpublished)

Aghdamy, Sanam (2008) Impacts of Environmental Loads on a Jack-up Offshore Structure. [Final Year Project] (Unpublished)

Agung Dewandaru, Agung (2008) A Map-matching Algorithm to Improve Vehicle Tracking Systems Accuracy. [Final Year Project] (Unpublished)

Ahamad, Mohd Izuan (2008) MOBILE VOICE TO SIGN LANGUAGE SYSTEM. [Final Year Project] (Unpublished)

Ahmad, Mohd ArifBin (2008) Effect of Groundwater Level toward Slope Stability. [Final Year Project] (Unpublished)

Ahmad, Mohd Asri (2008) Sensor Node for Medical Application. [Final Year Project] (Unpublished)

Ahmad, Mohd Azrin (2008) Design and Prototype of Specific Gravity based Element Identifier. [Final Year Project] (Unpublished)

Ahmad Abeed Mohd Lotfy, Ahmad Abeed (2008) EXPERT PROFILE DATABASE for Computer and Information Sciences Department,UTP. [Final Year Project] (Unpublished)

Ahmad Abustaman, Mohd Zikri (2008) Processing of Alumina Powder into Ceramic Foam Materials by Impregnating Polyurethane Sponge with Bonded Ceramic Slurry. [Final Year Project] (Unpublished)

Ahmad Damanhuri bin Sharipudin, Damanhuri (2008) New Design of Heat Spreader for Semiconductor Device. [Final Year Project] (Unpublished)

Ahmad Exsan bin Othman, Ahmad Exsan (2008) Study on various types of antirust to prevent corrosion on heat sink terminal. [Final Year Project] (Unpublished)

Ahmad Fadhil Hafiz Bin Mohd Ali, Ahmad Fadhil Hafiz (2008) The Enhancement of Micro Grinding Process By Using NdFeB To Seize Material Dust. [Final Year Project] (Unpublished)

Ahmad Fairus Bin Zamri, Ahmad Fairus (2008) Analysis of Jet Fire on Intumescent Coating Applied on Steel Substrate. [Final Year Project] (Unpublished)

Ahmad Hidayat Bin Dahalam, Ahmad Hidayat (2008) Design and Fabrication of a Brush Cutter to Lawn Mower Conversion Kit. [Final Year Project] (Unpublished)

Ahmad Khairuddin bin Ahmad Kamal, Ahmad Khairuddin (2008) CFD Simulation and Wind Tunnel Test of NACA 4412 Airfoil Wing Section at Different Angles of Attack. [Final Year Project] (Unpublished)

Ahmad Ruslan, Ahmad Ehsan (2008) Effect of Used Engine Oil to High Strength Microwave Incinerated Rice Husk Ash (MIRRA) Concrete. [Final Year Project] (Unpublished)

Ahmad Ruslan, Ahmad Ehsan (2008) Effect of Well Pattern to the Water Alternating Gas (WAG) Carbon Dioxide Injection on Angsi 1-35 Reservoir. [Final Year Project] (Unpublished)

Ahmad Syahidi Bin Che Zainal, Ahmad Syahidi (2008) An Experimental Study On The Wave Induced Instability Of Pipelines: The Breakout Of Pipelines. [Final Year Project] (Unpublished)

Ahmad Tarmizi, Mohd Fairozlan (2008) Total Productive Maintenance Assessment on Discrete Manufacturing System. [Final Year Project] (Unpublished)

Ahmad Zamani Masnizam Bin Abdullah Zawawi, Ahmad Zamani Masnizam (2008) Study of the Effects of Flame Perturbation by High-Speed Schlieren Imaging. [Final Year Project] (Unpublished)

Ahmed Jad Elrab, Ahmed Mohammed (2008) Spatio-Temporal processing for Optimum Uplink-Downlink WCDMA Systems. Masters thesis, Universiti Teknologi Petronas.

Ajid, Azlia (2008) Solar Powered Exhaust Fan for Automobiles. [Final Year Project] (Unpublished)

Ali, Fahmi (2008) Design and Analysis of Suspension System for a Formula SAE Race Car. [Final Year Project] (Unpublished)

Alia Ditta, Ashmil Fanaz (2008) Aerobic Digestion of Municipal Waste Activated Sludge and Wastewater using SPRINKJET and Diffuser. [Final Year Project] (Unpublished)

Alia Hafiza binti Abd Hamid, Alia Hafiza (2008) Use Of Recycle Ferric Chloride Extracted From Groundwater Treatment Plant Sludge In Thickening Of Municipal Sludge And Treatment Of Leachate. [Final Year Project] (Unpublished)

Alunad Azaldin, Mohd Amirul Farez (2008) The Usage of Copper Slag in Bituminous Mix. [Final Year Project] (Unpublished)

Amir Afiz Bin Mohamed Nizan, Amir Afiz (2008) Human Transporter(E-Porter). [Final Year Project] (Unpublished)

Amir Fadhli Bin Razali, Amir Fadhli (2008) Monitoring the Dengue Population/Breeding ground using Geographic Information System (CIS) for the Dengue Mitigation Process. [Final Year Project] (Unpublished)

Amiruddin, Farah Syazana (2008) User Interface Design in Managing an Alarm System. [Final Year Project] (Unpublished)

Ammar Bin Azhar, Ammar (2008) Design Of A Finger Trainer Prototype For Paralyzed/Stroke Patients. [Final Year Project] (Unpublished)

Amran, Mohd Hafiz (2008) Investigation On Savonius Wind Turbine In Directed Flow. [Final Year Project] (Unpublished)

Anis Rafie bin Ahmat Rmadani, Anis Rafie (2008) Repeating Weld Repair’s Effect on Microstructure and Mechanical Properties of Weld Metal. [Final Year Project] (Unpublished)

Arifin, Mohd Nurhadi (2008) The Investigation i11to Tribological Properties of Carbon Fiber Reinforced Composite. [Final Year Project] (Unpublished)

Arob Deng Chol, Michael (2008) Study of Stick-slip torsional vibration in Drilling Operation. [Final Year Project] (Unpublished)

Ashmil Fanaz b. Alla Ditta, Ashmil Fanaz (2008) Aerobic Digestion of Municipal Waste Activated Sludge and Wastewater using Sprinkjet and Diffuser. [Final Year Project] (Unpublished)

Asmawi Bin Sha’ari, Asmawi (2008) Simulation Of Sintering In Powder Metallurgy Application For Ferrous Materials. [Final Year Project] (Unpublished)

Asmoe, Mohammad Asree (2008) Online Payment System Using SMS. [Final Year Project] (Unpublished)

Awang, Fauziah (2008) UTP Online Bookstore System. [Final Year Project] (Unpublished)

Ayob, Mohamad Firdaus (2008) Investigation into the Potential ofBio-based Automotive Engine Lnbrieation Oil Using Tribologieal Test Method. [Final Year Project] (Unpublished)

Azahariman Bin Azazian, Azahariman (2008) The Effects of Multiple-Use of Polyethylene Terephthalate (PET) Bottles on Antimony Concentration. [Final Year Project] (Unpublished)

Azazian, Azahariman (2008) The Effects of Multiple-Use of Polyethylene Terephthalate (PET) Bottles on Antimony Concentration. [Final Year Project] (Unpublished)

Azemi, Mohd Aziman (2008) Failure Analysis of Heat Exchanger's Tubes at GPP Kerteh. [Final Year Project] (Unpublished)

Azhari Hassan, Sara (2008) DEVELOPMENT OFAN E- VOTING SYSTEM. [Final Year Project] (Unpublished)

Aziz, Ahmad Azfar (2008) Precipitation of Heavy Metals Using "Cuttlebone-Citrus Aurantifolia"(CB-CA ). [Final Year Project] (Unpublished)

Aziz, Azman (2008) Design and Analysis of a Disc Rotor for a Small Race Car's Braking System. [Final Year Project] (Unpublished)

Azlan Bin Mohamed Adnan, Azlan (2008) Computer Aided Reverse Engineering with Renishaw Digitizer for Digitization and Mazak for Model Fabrication. [Final Year Project] (Unpublished)

Azri Izwan Bin Mazlan, Azri Izwan (2008) Characterization and Properties of Copper and Carbon Powders Mixture. [Final Year Project] (Unpublished)

Azrul Nizam Bin Othman, Azrul Nizam (2008) To Design and Develop Fe-Cu-C Alloying Suitable for Self Lubricating Bearing through Powder Metallurgy (P/M) Technique. [Final Year Project] (Unpublished)

B

BEZIRGENOVICH, NURAHMET TONNIYEV (2008) ELECTRONIC THROTTLE CONTROL. [Final Year Project] (Unpublished)

Baharuddin, Halif Rizuan (2008) Mobile University Notification System Using Jabber Protocol. [Final Year Project] (Unpublished)

Bahrom, Mohd Rasydan (2008) EFFECT OF WATER DEPTH ON THE BEHAVIOUR OF SPAR PLATFORM. [Final Year Project] (Unpublished)

Balqis Binti Subki, Balqis (2008) Lighting Energy Audit in New Academic Buildings of Universiti Teknologi PETRONAS. [Final Year Project] (Unpublished)

Batool, Nazr e (2008) Markov-Gibbs Random Field Approach for Modeling of Skin Surface Textures. [Final Year Project] (Unpublished)

Besar, Mohd Firdaus (2008) COz Corrosion Stndy by Electrochemical Impedance Spectroscopy (EIS) and Linear Polarization Resistance (LPR). [Final Year Project] (Unpublished)

C

CHE KU SALIM, CHE KU 'ADLAN (2008) AN AQUATIC QUALITY AUTOMATION SYSTEM (AQAS). [Final Year Project] (Unpublished)

CHE MANSHOR, MAGHF ARAH (2008) Design and Development of mould of UTP souvenir photo frame using Rapid Prototyping and Rapid Tooling technique. [Final Year Project] (Unpublished)

CHHY , SOMNADY (2008) Mobile Tour Assistant. [Final Year Project] (Unpublished)

Chai , Set Lee (2008) Use of Magnetic Field in Paraffin Wax Deposition Control for Surface Facilities. [Final Year Project] (Unpublished)

Chan , Tuck Leong (2008) Inherent Safety Intervention Framework. PhD. thesis, Universiti Teknologi Petronas.

Chandio, Adnan Iqbal (2008) Asset Remaining Life Cycle Assessment (ARLCA). [Final Year Project] (Unpublished)

Che Jamil, Mas Elina (2008) Effect of Rice Husk Ash (RHA) on the Compressibility of Soil in Changkat Chermin, Perak. [Final Year Project] (Unpublished)

Che Mohd Nasir, Muhammad Za'im Zaki (2008) Solid Waste Management System in UTP Academic Complex. [Final Year Project] (Unpublished)

Che Rawi, Muhammad Afifi (2008) Removal of Heavy Metal from Aqueous Solutions using Ground Water Treatment Plant Sludge. [Final Year Project] (Unpublished)

Che. Azmi, Mohd. Rashdan (2008) THE IMPLEMENTATION OF MS ISO 9001:2000 QUALITY MANAGEMENT SYSTEM WITHIN CONSTRUCTION INDUSTRY IN MALAYSIA. [Final Year Project] (Unpublished)

D

Darail, Nuraini (2008) Spatial Variability of Soil pH and Phosphorus Content at UTP Campus. [Final Year Project] (Unpublished)

Dedi Atunggal SP, Dedi (2008) Digital Terrain Modeling by Using Real Time Kinematic GPS Data. Masters thesis, Universiti Teknologi Petronas.

Dewandaru, Agung (2008) A Map-matching Algorithm to Improve Vehicle Tracking Systems Accuracy. Masters thesis, Universiti teknologi Petronas.

Dhany, Saputra (2008) Separator Database and SPM Tree Framework for Mining Sequential Patterns Using Prefixspan with Pseudoprojection. Masters thesis, Universiti Teknologi Petronas.

Do Kim Dieu, Do Kim (2008) Development of AJAX – Based Inverse Auction Website. [Final Year Project] (Unpublished)

Dzulkifli, Muhammad Nazri (2008) AERODYNAMIC CHANGES WHEN TWO VEHICLES ARE IN PROXIMITY TO EACH OTHER. [Final Year Project] (Unpublished)

E

EKKLESIA, DICKY (2008) SEMANTICALLY INTEGRATED E-LEARNING INTEROPERABILITY AGENT. Masters thesis, UNIVERSITI TEKNOLOGI PETRONAS.

Ebrahimi, Seyed Mohammad (2008) AJAX ONLINE PHOTO EDITING APPLICATION. [Final Year Project] (Unpublished)

Ee, TeikMun (2008) Pilot Study on Laminated Tooling with Implementation of Conformal Channel. [Final Year Project] (Unpublished)

Emier Helmee Md Dewa, Emier Helmee (2008) Redesign and Fabrication of a Mechanical Seal for Pumps. [Final Year Project] (Unpublished)

F

Fauzi, Faiz Hafzan (2008) Adsorption of Copper, Zinc and Iron using Microwave Incinerated Rice Husk Ash (MIRHA) Columns. [Final Year Project] (Unpublished)

G

GANI, REGINA (2008) WA VELET-DCT BASED IMAGE CODER FOR VIDEO CODING APPLICATIONS. [Final Year Project] (Unpublished)

Guama Shulle, Jackline Alphonse (2008) Improving the Performance of Medium Access Control Protocols for Mobile Adhoc Network with Smart Antennas. Masters thesis, UNIVERSITI TEKNOLOGI PETRONAS.

Gulwa, Mzolisi (2008) Management and Processing of Waste Generated In UTP Cafeterias. [Final Year Project] (Unpublished)

H

HALLIYEV, SERDAR (2008) RELATIVE PERMEABILITY HYSTERESIS. [Final Year Project] (Unpublished)

HAMIDON, FATIMAH ZAHARAH (2008) GATE DRIVER CIRCUIT DESIGN FOR HIGH FREQUENCY SWITCH. [Final Year Project] (Unpublished)

HAMZAH, MOHD ZULKIFLI (2008) HEAT AND RAIN DETECTION SYSTEM FOR POWER WINDOW IN VEHICLE. [Final Year Project] (Unpublished)

HARUN, NURUL 'AIN (2008) THE EFFECT OF CARBON DIOXIDE AND STEAM IN STRENGTH OF MODIFIED TRONOH'S MINING SAND USING QUICKLIME. [Final Year Project] (Unpublished)

HEMCHI, THA WEESAK (2008) Thermal Stress and Thermal Expansion in a brake drum of heavy commercial truck. [Final Year Project] (Unpublished)

HUSSIN, HAFFIZ (2008) ULTRA HIGH STRENGTH CONCRETE. [Final Year Project] (Unpublished)

Hafifi bin Mohd Yusop, Hafifi (2008) Modeling and Analysis of Disc Brake Performance. [Final Year Project] (Unpublished)

Hamat, Mohd Eazaq Farommi (2008) Evaporative Cooler As an Air Inlet Treatment Of Gas Turbine. [Final Year Project] (Unpublished)

Hamdani, Hazrina Yusof (2008) Gene Prediction System ·. [Final Year Project] (Unpublished)

Hamedzadeh, Amirl-lossein (2008) Dynamic Analysis of semi-Submersible in Time Domain. [Final Year Project] (Unpublished)

Harun, Firdaus (2008) Fitness-for-Service Assessment for Pressurized Components with Geometric Distortion. [Final Year Project] (Unpublished)

Hasan, Noreta (2008) Effect of Rice Husk Ash on Shear Strength of Soil in Changkat Chermin, Perak. [Final Year Project] (Unpublished)

Hasmi Saifuddin Bin Sebi @ Hasbi, Hasmi Saifuddin (2008) The Use of Marine Sand in Bituminous Mixer. [Final Year Project] (Unpublished)

Hassan, Cik Suhana (2008) Stress Analysis of Steam-Methane Reformer Tube. [Final Year Project] (Unpublished)

Hassan, Muhamad Firdaus (2008) MOBILE SIGN TO VOICE (MS2V). [Final Year Project] (Unpublished)

Hassan, Raja Shahzad (2008) Injection Parameters Effect on the Perfom1ance of Compressed Natural Gas Direct Injection (CNG-DI) Engine under Lean Stratified Conditions. Masters thesis, UNIVERSITI TEKNOLOGI PETRONAS.

Hassan Jamil, Roshida (2008) Design ofExperiment on Ultra Violet Curing Die Attach Filmby Using Taguchi Method to Optimize Quality. [Final Year Project] (Unpublished)

Hidzir, Hazwani (2008) Digital Terrain Modelling With Total Station for Certain Engineering Purposes. [Final Year Project] (Unpublished)

Hii, Jun Yew (2008) Polymer-Clay Microcrystalline Composites:Identification of Unique Mechanical Properties. [Final Year Project] (Unpublished)

Hilman Syazwan bin Shukor, Hilman Syazwan (2008) Validation Tool for E-government Portals in Malaysia Based on MAMPU Guideline. [Final Year Project] (Unpublished)

Ho , Sir Wee Lee (2008) Study on Corrosion Inhibitor Availability. [Final Year Project] (Unpublished)

Huei, Dee Boon (2008) Design and Fabrication of a Lab Scale Thermal Energy Storage in Ice. [Final Year Project] (Unpublished)

Hussein Hassan, Asma Abd Elhameed (2008) Performance of Carbon Fibre Reinforced Polymer (CFRP) Strips for Flexural Strengthening of Reinforced Concrete Beams Made of High Strength Fly Ash Concrete. Masters thesis, UNIVERSITI TEKNOLOGI PETRONAS.

Hussin, Muhammad Saufi (2008) Personal Document Management System. [Final Year Project] (Unpublished)

I

IBRAHIM, MUHAMMAD AZHAR (2008) Structural Strength Performance of Carbon Fiber Reinforced Polymer on High Strength Concrete Beam. [Final Year Project] (Unpublished)

ISMAIL, AZNAN (2008) Concrete Filled Steel Tubes (CFST). [Final Year Project] (Unpublished)

Ihtatho, Dani (2008) Objective Assessment of Area and Erythema of Psoriasis Lesion Using Digital Imaging and Colourimetry. Masters thesis, Universiti Teknologi Petronas.

Ikmal Hisyam Bin Mubarak, Ikmal Hisyam (2008) Computer Tools in Construction. [Final Year Project] (Unpublished)

Irwan Syah Bin Mohd Yasin, Irwan Syah (2008) Design and Fabrication of Hybrid Solar-Biomass System for Crops Drying. [Final Year Project] (Unpublished)

Iskandar, Nadia Amena (2008) Treatment of Landfill Leachate using Groundwater Treatment Plant Sludge. [Final Year Project] (Unpublished)

Ismail, Asma Farah (2008) The Effectiveness of Vegetative Swale on Surface Runoff at Construction Sites. [Final Year Project] (Unpublished)

Ismail, Fatihah (2008) INDUSTRIALIZED BUILDING SYSTEM: SYSTEM FORMWORK. [Final Year Project] (Unpublished)

Ismail, Mohd Sallehhudin (2008) Economic Dispatch In Power System. [Final Year Project] (Unpublished)

Ismail , Mohd Fadhlan (2008) Stress Concentration Factors at Two Radial Adjacent Nozzle-Header Connections of a Cylindrical Pressure Vessel. [Final Year Project] (Unpublished)

Ismail@Ab Aziz, Naguib Mahfuz (2008) PETROCHEMICALS PRODUCT INVENTORY SYSTEM. [Final Year Project] (Unpublished)

Izzat Amin Bin Mohd Yazid, Izzat Amin (2008) The Effect of High Strength Concrete by using Silica Fume and Used Engine Oil as Additive. [Final Year Project] (Unpublished)

J

JAFFAR, HAZERINA (2008) DOMESTIC GA$ MONITORING DEVICE. [Final Year Project] (Unpublished)

Jamaludin, Amril Hadri (2008) Effects of Polyvinyl Alcohol (PV A) in the Compressive Fatigue Strength of Concrete. [Final Year Project] (Unpublished)

Jamaludin, Mazhar Azrin (2008) Wall Climbing Robot. [Final Year Project] (Unpublished)

Jamaludin, Nur Syahadah (2008) Fabrication of Pinion Gear for Power Window of a Car through Powder Metallurgy Technique. [Final Year Project] (Unpublished)

Jamalulalam, Mohammad Afshar (2008) Automated Attendance System using Active RFID. [Final Year Project] (Unpublished)

Johan, Ii Ayuni (2008) The Effect of Different Filler Materials and Gradation on Rutting and Cracking of Bituminous Mixture. [Final Year Project] (Unpublished)

Johan, Nadathul Shima (2008) M-Commerce with MMS Receipt. [Final Year Project] (Unpublished)

John Edan, Shirlene Meredith (2008) DECISION-MAKING VISUALISATION APPUCATION BASED ON ARGUMENT-AS METAPHOR. [Final Year Project] (Unpublished)

Juing, Josephson (2008) Cross-section Strength of Hot-rolled Steel. [Final Year Project] (Unpublished)

Jusoh, Mohd Fadzzrul (2008) Wireless Electric Concept and Application in a Living Room. [Final Year Project] (Unpublished)

K

KAMARUDIN, MUHAMMAD HAZWAN (2008) LANDSLIDE RISK ZONING THROUGH REMOTE REMOTE SENSING AND GIS. [Final Year Project] (Unpublished)

KERMANY, ATIEH RANIDAR (2008) A STUDY OF MRF CMOS CIRCUIT DESIGN IMPLEMENTATION. [Final Year Project] (Unpublished)

KOH , MINGHAO (2008) WIMAX TESTBED. [Final Year Project] (Unpublished)

Kamaruddin, Mohd Fadzrizal (2008) Image, File & Knowledge (IFK) Manager. [Final Year Project] (Unpublished)

Kamarul Bahrin B. Mohd Kamil, Kamarul Bahrin (2008) Temperature Distribution on a Car Disc Brake. [Final Year Project] (Unpublished)

Kamaruzaman, Aizat (2008) Web-Based Practical Exam Monitoring System (WPEMS). [Final Year Project] (Unpublished)

Kassim, Siti Rokayah (2008) UTP Student Satisfaction Index Survey 2008. [Final Year Project] (Unpublished)

Kehing, Adeline Ervity (2008) Wave Attenuation by Floating Breakwater. [Final Year Project] (Unpublished)

Khairuldin, Putri Sarah Aainaa (2008) Coagulation-Clarification of Coloured Water Using Natural Coagulant (Moringa oleifera). [Final Year Project] (Unpublished)

Khalid, Nurul Ilmi (2008) Feedback Control System Design for High Frequency Converter. [Final Year Project] (Unpublished)

Kimin, Mohd Azrul Amin (2008) PRELIMINARY DESIGN OF PALM Oil. FROND GASIFIIm. [Final Year Project] (Unpublished)

Kong, Chai Chen (2008) The Study of Flow Characteristic in the Riser Pipe from the Subsea Wellhead to Kikeh FPSO. [Final Year Project] (Unpublished)

Kong , Chai Chen (2008) The Study of Flow Characteristic in the Riser Pipe from the Subsea Wellhead to Kikeh FPSO. [Final Year Project] (Unpublished)

Kum, Chee Mun (2008) Design of Multi-Cavity Injection Mold for Tensile and Flexural Test Specimens. [Final Year Project] (Unpublished)

Kum , Chee Mun (2008) Design of Multi-Cavity Injection Mold for Tensile and Flexural Test Specimens. [Final Year Project] (Unpublished)

Kumalasari, Intan (2008) The Correlation between Compaction Degree and Performance Life of Asphalt Concrete. Masters thesis, Universiti Teknologi Petronas.

Kusmaniirat, Mohd Khusyairi (2008) ESTIMATION OF FLASH FLOOD PROPERTIES DAMAGE BY USING GIS SPATIAL ANALYSIS. [Final Year Project] (Unpublished)

L

LEONG, KHAI SIANG (2008) Drilling Fluid Loss Control By Using Oil Palm Fibres. [Final Year Project] (Unpublished)

Le , Bang Duc (2008) Designing Omni-Directional Mobile Robot Platform for Research. [Final Year Project] (Unpublished)

Lee , Hui Yieng (2008) Suitability Analysis of Subsea Pipeline Route using GIS. [Final Year Project] (Unpublished)

Lee , Kee Foo (2008) Speed Analysis along Ipoh-Lumut Highway. [Final Year Project] (Unpublished)

Leong, Song Seng (2008) Customizing Prosthetic Leg Socket by using Rapid Prototype with Reverse Engineering. [Final Year Project] (Unpublished)

Longwa Milia, Richard Lado (2008) OPTIMIZATION OF. DRILLING HYDRAULICS IN VERTICAL HOLES. [Final Year Project] (Unpublished)

ldris, Mohamad Faizal (2008) 3D Seismic Interpretation and Development of Sequence Stratigraphic Model of a Carbonate Buildup in Central Luconia, Offshore Sarawak. Masters thesis, Universiti teknologi Petronas.

M

MAHA T, MOHD IQBAL HAQIM (2008) RECTENNA DESIGN FOR WIRELESS POWER TRANSMISSION. [Final Year Project] (Unpublished)

MAHMUD, MUHAMMAD AZHARUDDIN (2008) STUDY OF LOW VOLTAGE DISTRIBUTION SYSTEM IN BLOCK 5, UTP. [Final Year Project] (Unpublished)

MARZAN, NURUL ATIKAH (2008) INSTRUMENTATION FAULT SIMULATION TRAINING MODULE (FAST.tool). [Final Year Project] (Unpublished)

MARZAN, NURUL ATIKAH (2008) INSTRUMENTATION FAULT SIMULATION TRAINING MODULE (FAST.tool). [Final Year Project] (Unpublished)

MASA ALOGO BINDANG, Manuel (2008) Investigation of the Environmental Effect on Adhesive Bonds. [Final Year Project] (Unpublished)

MAT DAUD, NURHIDAYATI (2008) LEAD AND CADMIUM REMOVAL FROM AQUEOUS SOLUTION USING GROUNDWATER TREATMENT PLANT SLUDGE. [Final Year Project] (Unpublished)

MD YUSOFF, NORAIHAN (2008) THE EFFECT OF DIFFERENT AGGREGATE TYPES AND GRADATION ON THE CHARACTERISTICS OF BITUMINOUS MIXTURES. [Final Year Project] (Unpublished)

MOHAMAD AF ANDI, NUR HASYIMAH (2008) STUDY OF ZEOLITE IN MITIGATING FORMATION DAMAGE DUE TO INORGANIC SCALING. [Final Year Project] (Unpublished)

MOHAMAD RAFIUDDIN, MOHAMAD LOKMAN (2008) IMPLEMENTATION OF MICROCONTROLLER TO THE CONTROL OF AN AGV. [Final Year Project] (Unpublished)

MOHAMAD SHARIP, NOREEN SY AZLIN (2008) DESIGNING A SENSING UNIT OF A SENSOR NODE. [Final Year Project] (Unpublished)

MOHAMED, FARALIZA (2008) PET ROBOT. [Final Year Project] (Unpublished)

MOHAMED HASSAN, MOHAMED GHAUTH (2008) NETWORK ACTIVITY AUDITING USING LINUX RUNNING OFF A LOOPBACK ROOT FILESYSTEM. [Final Year Project] (Unpublished)

MOHAMMAD, MARLIANA (2008) DESIGN-FOR-TESTABILITY (DFT) TECHNIQUE FOR OPEN FAULTS IN CMOS LATCH/FLIP-FLOP. [Final Year Project] (Unpublished)

MOHD DAUD, NURUL SHAIDATUL SHIMA (2008) IMPLEMENTATION OF RFID AS AN ATTENDANCE RECORDING AND TRACKING SYSTEM IN UTP (Time Track). [Final Year Project] (Unpublished)

MOHD KHALID, MOHD AZIM (2008) Effect of Water Depth on the Behaviour of Triangular Tension Leg Platform (TLP). [Final Year Project] (Unpublished)

MOHD NOH, MUHAMAD F AHMI (2008) REDUCING COST OF DOMESTIC POWER USAGE BY USING CAPACITOR. [Final Year Project] (Unpublished)

MOHD NOR, NOR AFIF AH (2008) POWER SYSTEM CONFIGURATION, SHORT CffiCUIT ANALYSIS AND MOTOR STARTING STUDY OF AN OFFSHORE PLATFORM. [Final Year Project] (Unpublished)

MOHD NOR@ ABDULLAH, MOHO FARIZ IKRAM (2008) FLOOD PROTECTION GARAGE SYSTEM. [Final Year Project] (Unpublished)

MOHD RUSSIN, SRI RAHAYU (2008) LEAD AND CADMIUM REMOVAL FROM AQUEOUS SOLUTION USING WASTE MATERIAL (MICROWAVE INCINERATED RICE HUSK ASH). [Final Year Project] (Unpublished)

MOHD RUSSIN, SRI RAHA YU (2008) LEAD AND CADMIUM REMOVAL FROM AQUEOUS SOLUTION USING WASTE MATERIAL (MICROWAVE INCINERATED RICE HUSK ASH). [Final Year Project] (Unpublished)

MOHD SAID, MOHD SHUHAIZI (2008) STUDY ON THE MODULUS OF ELASTICITY & MODULUS OF RUPTURE OF SELF-COMPACTING CONCRETE THAT USE PFA AS ADDITIVES. [Final Year Project] (Unpublished)

MOHD SAPLI, NUR SY AHADAH (2008) Comparitive Study On Multiplier Algorithms using Verilog HDL. [Final Year Project] (Unpublished)

MOHD SHAFIQ AHMAD DAHALAN, MOHD SHAFIQ (2008) Extract Motion from Picture Sequence. [Final Year Project] (Unpublished)

MOHD YUSOFF, HAIRUL AKMAL (2008) In-situ Chlorine Generation for Water Disinfection. [Final Year Project] (Unpublished)

MOHD. NURI, NUR DIANA (2008) PERFORMANCE COMPARISON OF NON-INTERLEAVED BCH CODES AND INTERLEAVED BCH CODES. [Final Year Project] (Unpublished)

MOHD. YUSOFF, AHMAD SYAUFIK (2008) Bio-ethanol Fuel Study on Spray Characterization Using High Speed Digital Camera. [Final Year Project] (Unpublished)

MUHAMAD KAMARUZAMAN, MUHAMAD ZAMRY (2008) DYNAMIC MODELING AND CLOSED-LOOP CONTROL OF A TWIN ROTOR MIMO SYSTEM. [Final Year Project] (Unpublished)

MUHAMAD SHUKRI, NURUL AKMAL (2008) MICROCONTROLLER BASED LAPTOP COOLING SYSTEM. [Final Year Project] (Unpublished)

MUHAMMAD AQMAL BIN RATASHA, MUHAMMAD AQMAL (2008) Implementation of Risk-Based Inspection on Offshore Facilities. [Final Year Project] (Unpublished)

MUHAMMAD KHAIRIL ANUAR BIN MOKHTAR, MUHAMMAD KHAIRIL (2008) DESIGN AND DEVELOPMENT OF A SOLAR COOKER. [Final Year Project] (Unpublished)

MUHAMMAD NAZRI BIN DZULKIFLI, MUHAMMAD NAZRI (2008) Aerodynamic changes when two Vehicles are in a Proximity to each other. [Final Year Project] (Unpublished)

Mahamad, Sajee (2008) Blind Kcholocation. [Final Year Project] (Unpublished)

Mahamud, Noorhidayah (2008) Spatial variability of soil hydraulic properties at Universiti Teknologi Petronas (UTP). [Final Year Project] (Unpublished)

Mahir Elya El feel Agla, Mahir Elya (2008) Improving Hole Cleaning on High Angle Wells. [Final Year Project] (Unpublished)

Marjono, Nurulain (2008) Determination of Stress Intensity Factor for Arc-shaped Tension Specimen by Using Finite Element Analysis. [Final Year Project] (Unpublished)

Mas Elina Binti Che Jamil, Mas Elina (2008) Effect of Rice Husk Ash (RHA) on the Compressibility of Soil in Changkat Chermin, Perak. [Final Year Project] (Unpublished)

Masa Alogo Bindang, Manuel (2008) Investigation of the Environmental Effects on Adhesives Bonded Joints. [Final Year Project] (Unpublished)

Masduki, Saiful Khafiz (2008) (MOD) Mobile Obstacle Detector for Blind People. [Final Year Project] (Unpublished)

Mat Nasir, Mohamad Faiz (2008) Cavitation Failure of Local Made Propellers and Suggestion for Improvement. [Final Year Project] (Unpublished)

Mat Sahnizam Bin Tamat, Mat Sahnizam (2008) Thickening of Municipal Sludge and Treatment of Leachate Using Recycled Ferrous Sulphate (RFS) Extracted from Groundwater Treatment Plant Sludge. [Final Year Project] (Unpublished)

Mat Salleh, Siti Nur Hidayah (2008) The Effect of Multiple-use of Polystyrene Cups on Styrene Monomer Migration. [Final Year Project] (Unpublished)

Mat Shayuti, Muhammad Shafiq (2008) The Effect of High Temperature on Styrene Monomer Migration from Polystyrene. [Final Year Project] (Unpublished)

Mathews, Praveen Manaprath (2008) USB Learning Module. [Final Year Project] (Unpublished)

Mazlan, Azri Izwan (2008) Characterization and Properties of Copper and Carbon Powders Mixture. [Final Year Project] (Unpublished)

Md Dewa, Emier Helmee (2008) Redesign and Fabrication of a Mechanical Seal for Pumps. [Final Year Project] (Unpublished)

Md Din, Mohd Hazwan (2008) Study on Automotive Driveline System with Torque Converter Clutch under Harmonically Varying Normal Load. [Final Year Project] (Unpublished)

Md Fadhli Helmi B Noor Kamaruzaman, Md Fadhli Helmi (2008) Design of Submerged Wave-Induced Forcing Elements to Power a Linear Generator. [Final Year Project] (Unpublished)

Md Jaedan, Mohd Sahrul (2008) OPTIMIZATION OF CATHODE WASTE MATERIALS ON EPOXY BASED CONDUCTIVE PAINT PROPERTIES. [Final Year Project] (Unpublished)

Md Yunus, Yusheila (2008) Hybrid Solar Dryer with Biomass Integration. [Final Year Project] (Unpublished)

Md Yunus, Yusra Mazliza (2008) Comparison between Effect of Lime and Rice Husk Ash on California Bearing Ratio on Soil in Changkat Chermin. [Final Year Project] (Unpublished)

Md Yusof, Mohd Norzahidi (2008) Design and Development ofClothes Drying Closet Using Solar Energy. [Final Year Project] (Unpublished)

Megat Atif Bin Megat Shahair, Megat Atif (2008) Application of Weibull Probability to Predict the Size of Inclusion in Metallic Material. [Final Year Project] (Unpublished)

Megat Shahair, Megat Atif (2008) Application ofWeibull Probability to Predict the Size of Inclusion in Metallic Material. [Final Year Project] (Unpublished)

Memon, Naveed Ahmed (2008) Modeling and simulation of PI-Fuzzy Control on Gas Pilot Plant via Matlab/Simulink and Industrial PC. [Final Year Project] (Unpublished)

Meohan@ Ashaari, Mohd Annan (2008) Flood Problem at Junction Kg. Sentang : It causes and the Engineering Solutions. [Final Year Project] (Unpublished)

Mhd Khazar, Muhammad Afiq (2008) Utilization ofCatalyst Waste Moiinex (CWM) in concrete. [Final Year Project] (Unpublished)

Mhd Nasir, Natassya (2008) Yomeiri Xcessories.com. [Final Year Project] (Unpublished)

Mior Husain, Mior Ahmad Faizal (2008) TENSILE FATIGUE OF CONCRETE Wim POLYVINYL ALCOHOL. [Final Year Project] (Unpublished)

Mohamad, Mazila (2008) Dynamic Behaviour of Reinforced Concrete (RC) Beam Made of Self Compacting Concrete (SCC) by Using Pulverized Fuel Ash (PFA) and Rice Husk Ash (RHA) As an Additive. [Final Year Project] (Unpublished)

Mohamad, Syamimi (2008) E-Handrawn Calculator. [Final Year Project] (Unpublished)

Mohamad Amir Ridzwan B Mansor , Mohamad Amir Ridzwan (2008) The Design of Mechanisms for Gantry Crane Experimental Rig. [Final Year Project] (Unpublished)

Mohamad Faiz bin Mat Nasir, Mohamad Faiz (2008) Cavitation Failure of Local Made Propellers and Suggestion for Improvement. [Final Year Project] (Unpublished)

Mohamad Firdaus Bin Ayob, Mohamad Firdaus (2008) Investigation into the Potential of Bio-based Automotive Engine Lubrication Oil Using Tribological Test Method. [Final Year Project] (Unpublished)

Mohamad Najib Bin Mohtar, Mohamad Najib (2008) Developing Carbon Particle Reinforced Aluminium Composite by Powder Metallurgy. [Final Year Project] (Unpublished)

Mohamad Noor, Mohd Ruzaini (2008) Optimizing Heat Insulation of a Solar Oven. [Final Year Project] (Unpublished)

Mohamed Faiz bin Mohamed Amin, Mohamed Faiz (2008) Designing Air Intake System for Engine Performance and Efficiency Optimisation. [Final Year Project] (Unpublished)

Mohamed Fuad Al Farabi Shazi B Shaarani, Mohamed Fuad Al Farabi Shazi (2008) Design and Implementation of Robofly Wing Flapping Mechanism Using Piezoelectric Crystal. [Final Year Project] (Unpublished)

Mohamed Nizan, Amir Afiz (2008) HUMAN TRANSPORTER (E-Porter). [Final Year Project] (Unpublished)

Mohamed Rahim, Nur Aqilah (2008) Pile Selection Methodology. [Final Year Project] (Unpublished)

Mohamed Sirat, Mahfuza (2008) Designing Security System using MyKad. [Final Year Project] (Unpublished)

Mohamed Wazir, Muhamad Faiz (2008) Quizzes vis Short Message Service. [Final Year Project] (Unpublished)

Mohammad Asyraf bin Mohammad Hatta, Mohammad Asyraf (2008) Engine Testing of Gasoline and E5, E10, E15 and E20 Ethanol Blends. [Final Year Project] (Unpublished)

Mohammad Hatta, Mohammad Asyraf (2008) Engine Testing of Gasoline, ES, ElO, E15 and E20 Ethanol Blends. [Final Year Project] (Unpublished)

Mohammad Zuhairi bin Ramly, Mohammad Zuhairi (2008) The Design and Fabrication of a prototype machine: “asam gelugor” processing machine. [Final Year Project] (Unpublished)

Mohammed Ibrahim, Husam Eldeen (2008) UTILIZATION OF SOLAR ENERGY FOR COOLING. [Final Year Project] (Unpublished)

Mohd Abd Ghafar, Mohd Afiq (2008) Feasibility Study on Possibility of Using Flare Gas as a Source of Energy. [Final Year Project] (Unpublished)

Mohd Aiman Bin Ismail, Mohd Aiman (2008) Microstructure Characterization of Creep-Tested Reformer Tube Material. [Final Year Project] (Unpublished)

Mohd Akhir, Siti Norhanis (2008) Case-Based Menu Planner: Web-Based System. [Final Year Project] (Unpublished)

Mohd Akmal Bin Mohd Sobli, Mohd Akmal (2008) Spray Characteristic by using Phase Doppler Anemometry (PDA) and Laser Doppler Anemometry (LDV). [Final Year Project] (Unpublished)

Mohd Ali, Munirah (2008) Design & Development of Lab Scale Latent Heat Energy Storage Equipment using Paraffin Wax. [Final Year Project] (Unpublished)

Mohd Alif Syazwan bin Mohd Nasir, Mohd Alif Syazwan (2008) Experimental Modelling of the Fluid Flow in a Furnace Top of an Ethane Cracker in EPEMSB, Paka. [Final Year Project] (Unpublished)

Mohd Amirul Hakim Bin Sulaiman, Mohd Amirul Hakim (2008) Banana Trunk As A Lost Circulation Material In Hydrocarbon Drilling Fluid. [Final Year Project] (Unpublished)

Mohd Aziman Bin Azemi, Mohd Aziman (2008) Failure Analysis of Heat Exchanger’s Tubes at GPP Kerteh. [Final Year Project] (Unpublished)

Mohd Azmi, Farhad (2008) COOLING STORAGE FOR VEHICLES USING THERMOELECTRIC COOLER. [Final Year Project] (Unpublished)

Mohd Azrul Amin B Kimin, Mohd Azrul Amin (2008) Preliminary Design Of Palm Oil Frond Gasifier. [Final Year Project] (Unpublished)

Mohd Azuan Bin Mohamad Nor, Mohd Azuan (2008) Study And Development Of Pellet Fuel From Oil Palm Frond. [Final Year Project] (Unpublished)

Mohd Daud, Nasrul Hakim (2008) The Performance of used engine oil on high strength concrete : A Structural Behaviour of Reinforced Concrete Elements Under Static Loading. [Final Year Project] (Unpublished)

Mohd Eazaq Farommi Bin Hamat, Mohd Eazaq (2008) Evaporative Cooler As an Air Inlet Treatment Of Gas Turbine. [Final Year Project] (Unpublished)

Mohd Fadhlan bin Ismail, Mohd Fadhlan (2008) Stress Concentration Factors at Two Radial Adjacent Nozzle-Header Connections of a Cylindrical Pressure Vessel. [Final Year Project] (Unpublished)

Mohd Fairozlan Bin Ahmad Tarmizi, Mohd Fairozlan (2008) Total Productive Maintenance Assessment on Discrete Manufacturing System. [Final Year Project] (Unpublished)

Mohd Faizal Din Chan, Mohd Naquib (2008) Vibration Isolation of Floating Raft System. [Final Year Project] (Unpublished)

Mohd Fasya b. Ramsah, Mohd Fasya (2008) Characterization and Properties of Nickel Powder and Carbon Powder Mixture. [Final Year Project] (Unpublished)

Mohd Fauzie, Noor Atikah (2008) Modeling and Simulation of Robots Playing Football using MA TLAB/SIMULINK. [Final Year Project] (Unpublished)

Mohd Fikram Bin Mat Yazid, Mohd Fikram (2008) Development of a Failure Prediction Model for Heat Exchanger Tube. [Final Year Project] (Unpublished)

Mohd Firdaus Rosli, Mohd Firdaus (2008) City Bus Characteristics : Ipoh- Tanjung Rambutan. [Final Year Project] (Unpublished)

Mohd Hafiz bin Amran, Mohd Hafiz (2008) Investigation on Savonius Wind Turbine in Directed Flow. [Final Year Project] (Unpublished)

Mohd Hamdan, Mohd Hadzwan (2008) Implementation of E-Voting System: Case Study for Universiti Teknologi PETRONAS. [Final Year Project] (Unpublished)

Mohd Hanifa, Hazlinda (2008) Offshore Pipeline Free Spanning Analysis Based On DNV Design Code. [Final Year Project] (Unpublished)

Mohd Hilmi, Amirul Ehsan (2008) MOTION PLANNING ALGORITHM FOR VEHICLE PARKING SIMULATION. [Final Year Project] (Unpublished)

Mohd Hizan, Harez (2008) Soil Stabilisation Using Rice Husk Ash (RHA) in Marine Clay. [Final Year Project] (Unpublished)

Mohd Hosni, Mohammad Nurhafizi (2008) Performance of Bituminous Mix based on Aggregate Packing. [Final Year Project] (Unpublished)

Mohd Idrus, Nadirah (2008) COMMUNITY MOBILE SERVICES (FYP PROJECT FOR 2 SEMESTERS). [Final Year Project] (Unpublished)

Mohd Izwan Hadi b. Ismail @ Mansor, Mohd Izwan (2008) Parametric Study on Passive Suspension of Light Rail Vehicle (LRV). [Final Year Project] (Unpublished)

Mohd Izwan Hadi b. Ismail @ Mansor, Mohd Izwan Hadi (2008) Parametric Study on Passive Suspension of Light Rail Vehicle (LRV). [Final Year Project] (Unpublished)

Mohd Izwan Hadi b. Ismail @ Mansor, Mohd Izwan (2008) Parametric Study on Passive Suspension of Light Rail Vehicle (LRV). [Final Year Project] (Unpublished)

Mohd Kabri, Mohd Juzaili (2008) Usage oflron Sludge As Filler in ACWC 20 Mix. [Final Year Project] (Unpublished)

Mohd Kamal Aizat Bin Ahmad, Mohd Kamal (2008) Development of Decision Support System for Corrosion under Insulation (CUI) for Austenitic Stainless Steels and Carbon Steels. [Final Year Project] (Unpublished)

Mohd Khalifa Taufiq Kamaruddin, Mohd Khalifa Taufiq (2008) Emergency Power Supply To Start A Car. [Final Year Project] (Unpublished)

Mohd Khusyairi Bin Kusmaniirat, Mohd Khusyairi (2008) Estimation of Flash Flood Properties Damage by Using GIS Spatial Analysis. [Final Year Project] (Unpublished)

Mohd Naim B. Ruslan, Mohd Naim (2008) Microbiological Influence Corrosion Study on Offshore pipelines. [Final Year Project] (Unpublished)

Mohd Naquib bin Mohd Faizal Din Chan, Mohd Naquib (2008) Vibration Isolation of Floating Raft System. [Final Year Project] (Unpublished)

Mohd Nasir, Mohd Alif Syazwan (2008) Experimental Modelling of the Fluid Flow in a Furnace Top of an Ethane Cracker in EPEMSB, Paka. [Final Year Project] (Unpublished)

Mohd Nazri Bin Me, Mohd Nazri (2008) Design of Laboratory Scale Prototype of Hydrothermal Crystallizer. [Final Year Project] (Unpublished)

Mohd Nazwan bin Dzulkarnine, Mohd Nazwan (2008) Phased Array: An Alternative of Non Destructive Test Method to Replace Conventional Radiographic Test (RT) and Ultrasonic Test (UT) for Linepipe Inspection. [Final Year Project] (Unpublished)

Mohd Nor, Zatul Iffah (2008) Alternative Solution to Sand Blanket in Vertical Drain. [Final Year Project] (Unpublished)

Mohd Norzahidi Bin Md Yusof, Mohd Norzahidi (2008) Design and Development of Clothes Drying Closet Using Solar Energy. [Final Year Project] (Unpublished)

Mohd Nuh Aizat B Mohd Daut, Mohd Nuh Aizat (2008) CNC Manufacturing of NACA 4412 Wing Sections for Wind Tunnel Test. [Final Year Project] (Unpublished)

Mohd Nurhadi bin Arifin, Mohd Nurhadi (2008) The Investigation into Tribological Properties of Carbon Fiber Reinforced Composite. [Final Year Project] (Unpublished)

Mohd Omar, Fakrur Radzi (2008) SOLIDIFICATION OF WASTE ACTIVATED SLUDGE FROM PETROLEUM REFINERY. [Final Year Project] (Unpublished)

Mohd Radzi Bin Mohd Anua, Mohd Radzi (2008) Design and Prototyping of Centrifugal Pump Impeller to be used as Water Injection Pump for Hydrocarbon Artificial Lift. [Final Year Project] (Unpublished)

Mohd Rakbi, Norfadliana (2008) Interactive Learning System forE-commerce, Technopreneursip. [Final Year Project] (Unpublished)

Mohd Roslan, Nur Adilawati (2008) THE EFFECT OF ROAD HUMPS AND RAISED CROSSWALKS ON VEIDCLES SPEED. [Final Year Project] (Unpublished)

Mohd Ruzaini Bin Mohamad Noor, Mohd Ruzaini (2008) Optimizing Heat Insulation of a Solar Oven. [Final Year Project] (Unpublished)

Mohd Safian, Bari' Asyraf (2008) Implementation of Computer Control in Control Loop Process. [Final Year Project] (Unpublished)

Mohd Sazali, Hannis Salwani (2008) Responses of Square Tension Leg Platform Subjected To Regular Wave. [Final Year Project] (Unpublished)

Mohd Shah Rizal Bin Mohd Yusof, Mohd Shah Rizal (2008) Engine Performance and Exhaust Emission Characteristics of Fuel Oil-Diesel Fuel Mixture in a Single Cylinder Engine. [Final Year Project] (Unpublished)

Mohd Shukri Bin Mohd Nor, Mohd Shukri (2008) Material Compability and Fuel Properties for E10 and E85. [Final Year Project] (Unpublished)

Mohd Shukri Bin Mohd Nor, Mohd Shukri (2008) Material Compatibility And Fuel Properties For E10 And E85. [Final Year Project] (Unpublished)

Mohd Sobli, Mohd Akmal (2008) Spray Characteristic by using Phase Doppler Aiiemometry (PDA) and Laser Doppler Anemomctry (LDV). [Final Year Project] (Unpublished)

Mohd Taufek Bin Tumali, Mohd Taufek (2008) Design Of Freewheel Coupling. [Final Year Project] (Unpublished)

Mohd Ubaidillah bin Mohd Kamal, Mohd Ubaidillah (2008) Design of A Ballast Tank For A Small Underwater Remotely Operated Vehicle (ROV). [Final Year Project] (Unpublished)

Mohd Yasin, Irwan Syah (2008) Design andFabrication ofHybrid Solar-Biomass System for Crops Drying. [Final Year Project] (Unpublished)

Mohd Yunus, Mohd Zulfadli (2008) Risk Based Inspection on Gas Processing Plant. [Final Year Project] (Unpublished)

Mohd Yusof, Farhan Iqbal (2008) Treatment and Stabilisation of Groundwater Treatment Plant Sludge using Electroosmosis. [Final Year Project] (Unpublished)

Mohd Yusof, Nurul Ain (2008) Ajax Based T-Shirt Customization Using OSS. [Final Year Project] (Unpublished)

Mohd Yusoff, Mohd Fareez (2008) Analysis ofHigb Frequency Transformer Design in Converter Application. [Final Year Project] (Unpublished)

Mohd Yusop, Hafifi (2008) MODELING AND ANALYSIS OF DISC BRAKE PERFORMANCE. [Final Year Project] (Unpublished)

Mohd Zain, Ihsan (2008) Fabrication of a Small Scale Model of Chancellor Award Trophy using CAD/CAM and CNC Milling Machine. [Final Year Project] (Unpublished)

Mohd Zainudin, Anis Suria (2008) Arbitrage Detector Alert System. [Final Year Project] (Unpublished)

Mohd Zaki Al Hafiz bin Rosli, Mohd Zaki Al Hafiz (2008) Implementation of dust control system using management and planning tools (MPT). [Final Year Project] (Unpublished)

Mohd Zikri Bin Ahmad Abustaman, Mohd Zikri (2008) Processing of Alumina Powder into Ceramic Foam Materials by Impregnating Polyurethane Sponge with Bonded Ceramic Slurry. [Final Year Project] (Unpublished)

Mohd Zim, Mohd Audi Ashraaf (2008) Responses of Triangular Tension Leg Platform Subjected to Random Waves. [Final Year Project] (Unpublished)

Mohd Zin, Nur Azimah (2008) Effect of Mooring Lines on the Responses of Spar Platforms. [Final Year Project] (Unpublished)

Mohd. Nasrul Bin Mat Yusof, Mohd. Nasrul (2008) Gas Turbine Blade Failure Due To Hot Corrosion. [Final Year Project] (Unpublished)

Mohtar, Mohamad Najib (2008) Developing Carbon Particle Reinforced Alnmininm Composite byPowder Metallurgy. [Final Year Project] (Unpublished)

Mokhtar, Mohd Shahadan (2008) Distributed Personal Authentication Systems (DP AS). [Final Year Project] (Unpublished)

Mokhtar, Mohd Zulhilmi (2008) Effect of Non-Ground Copper Slag on Properties of Concrete. [Final Year Project] (Unpublished)

Mokhtar, Muhammad Hanif (2008) Blog As a Learning Tool: UTP Perspective. [Final Year Project] (Unpublished)

Mokhtar, Zainur Azwin (2008) ANALYSIS ON CHARACTERISTIC OF SABAH BENTONITE AT IDGH TEMPERATURE UNDER DYNAMIC CONDffiON. [Final Year Project] (Unpublished)

Moktar, Mohammad Faiz (2008) Study on Sintering Behavior of Alumina Particle Reinforced Aluminum Matrix Composites and Its Properties. [Final Year Project] (Unpublished)

Monsarif, Mohd Iqbal Farid (2008) High Tensile Strength Concrete. [Final Year Project] (Unpublished)

Muhamad, Marni (2008) Metered Multi-Moisture Detector. [Final Year Project] (Unpublished)

Muhamad Afiq Bin Ahmad, Muhamad Afiq (2008) Gas Turbine Efficiency Improvement at Centralised Utility Facilities (CUF) Kertih, Terengganu. [Final Year Project] (Unpublished)

Muhamad Farizuddin Anwar bin Mansor, Muhamad Farizuddin (2008) Design Of A Cathodic Protection Against Corrosion For Marine And Offshore Structure. [Final Year Project] (Unpublished)

Muhamad Jani, Aizat (2008) ADSORPTIVE REMOVAL OF TEXTILE DYES (CIBACRON YELLOW CSG) FROM AQUEOUS SOLUTION BY COCONUT COIR CARBON. [Final Year Project] (Unpublished)

Muhamad Nasrah, Nur Syazni (2008) State Variable Feedbaek Control of a Gantry Crane. [Final Year Project] (Unpublished)

Muhamad Zainurul Asyraf bin Ismail, Muhamad Zainurul Asyraf (2008) CFD of Viscoelastic Fluid in Horizontal Flow Pipes. [Final Year Project] (Unpublished)

Muhamad Zulhairie bin Moideen, Muhamad Zulhairie (2008) Sway Reduction of Tower Crane. [Final Year Project] (Unpublished)

Muhammad Adib , Muhammad Syazwan (2008) Design and Simulate Radio Frequency (RF) CMOS Mixer Circuit. [Final Year Project] (Unpublished)

Muhammad Afiq Bin Mhd Khazar, Muhammad Afiq (2008) Utilization of Catalyst Waste Molinex (CWM) in concrete. [Final Year Project] (Unpublished)

Muhammad Aizuddin Bin Muaz, Muhammad Aizuddin (2008) Implication of Design and Operation on Cooling Load and Energy Cost for Academic Building At UTP. [Final Year Project] (Unpublished)

Muhammad Aizuddin bin Zainalabidin, Muhammad Aizuddin (2008) Miscible CO2 Injection: Sensitivity To Fluid Properties Tinggi Field. [Final Year Project] (Unpublished)

Muhammad Bin Roslan, Muhammad (2008) Thermal Characterization of Carbonaceous Pitches from Residue of PETRONAS Refinery. [Final Year Project] (Unpublished)

Muhammad Bukhari bin Abdul Jalil, Muhammad Bukhari (2008) Freezing Point Depression Method for Hydrate Monitoring. [Final Year Project] (Unpublished)

Muhammad Fahmi Bin Mustafa, Muhammad Fahmi (2008) A Study of Pressure Surge Effects on Transportation Pipeline. [Final Year Project] (Unpublished)

Muhammad Farid Bin Abdullah, Muhammad Farid (2008) Study and Design of Compressed Air System for Optimum Operation. [Final Year Project] (Unpublished)

Muhammad Ikhbar B. Md Ismail, Muhammad Ikhbar (2008) Effect of Performance of A DC Motor by Replacing Ferrite Magnet with Melt Spun NdFeB Magnet. [Final Year Project] (Unpublished)

Muhammad Naim bin Ariffin, Muhammad Naim (2008) Design of a New Centrifugal Pump Impeller. [Final Year Project] (Unpublished)

Muhammad Shafiq bin Mat Shayuti, Muhammad Shafiq (2008) The Effect of High Temperature on Styrene Monomer Migration from Polystyrene Cup. [Final Year Project] (Unpublished)

Muhammad Thaqif Bin Roslim, Muhammad Thaqif (2008) Experimental Study on Scale Control in Surface Pipelines by Magnetic Descaler. [Final Year Project] (Unpublished)

Muhammad Yusof B. Abd Rahim, Muhammad Yusof (2008) Pressure as an Indicator for Water Breakthrough for Horizontal Well Completion. [Final Year Project] (Unpublished)

Muhammad Zukni Bin Ibrahim, Muhammad Zukni (2008) Design and Analysis of Power Take-Off (PTO) and Telescopic Driveshafts. [Final Year Project] (Unpublished)

Muhd Hafiz B Hilmi, Muhd Hafiz (2008) The Study of Linear Elastic Fracture Mechanics (LEFM) in Fracture. [Final Year Project] (Unpublished)

Muhd Khiyar, Nur Zeenaida (2008) An Investigation on the Tribological Performance of Carbon nanotube (CNT) as a Lubricant Additive to Locally Made Engine Oil. [Final Year Project] (Unpublished)

Muhd Zulhafriz Aadel bin Marzuki, Muhd Zulhafriz (2008) Building an Algorithm for Measuring C Programming Assignments Quality. [Final Year Project] (Unpublished)

Mujtahid bin Mohd Abidin, Mujtahid (2008) An Investigation on the Effects of an Intake Air-Swirl Device on Fuel Consumption of a Spark Ignition Engine. [Final Year Project] (Unpublished)

Mustapha, Syazana (2008) Vermicomposting of Yard Waste and Shredded Paper by Eisenia Foetida. [Final Year Project] (Unpublished)

N

NG , BOON HOCK (2008) WAVE FORCES ON FLOATING BREAKWATER. [Final Year Project] (Unpublished)

NGATENAH, SITI NOR IDAYU (2008) NITRATE AND PHOSPHORUS REMOVAL FROM MUNICIPAL WASTEWATER TREATMENT PLANT EFFLUENT USING PHYTOREMEDIATION SITI. [Final Year Project] (Unpublished)

NIK MOHO SHUKRI, NIK MOHD F AKRUL FIDZRIE (2008) DIGITAL TERRAIN MODELING (DTM) WITH RTK GPS FOR CERTAIN ENGINEERING USES. [Final Year Project] (Unpublished)

NUR AZURA BINTI KAMARUZZAMAN, NUR AZURA (2008) Wave Energy Eletric Generator. [Final Year Project] (Unpublished)

NUR SHAZANA SULAIMAN, NUR SHAZANA (2008) Knowledge Management Portal for Student Industrial Internship Programme. [Final Year Project] (Unpublished)

Nadarajan, Chandrakumar (2008) Effects of Elevated Temperatures on Microwave Incinerated Rice Husk Ash blended Concrete. [Final Year Project] (Unpublished)

Nadiah Mohd Zaki, Nadiah (2008) CFD Simulation of Visco-Elastic Fluids in Vertical Flow Pipes. [Final Year Project] (Unpublished)

Naizatul Akmal Binti Abdullah, Naizatul Akmal (2008) Identifying and Handling Black Spot in Transportation Engineering(Batu Gajah-Taman Maju Route). [Final Year Project] (Unpublished)

Nashreen Mhd Razali, Nashreen (2008) Development of an Analytical Model of Gas Turbine to Predict the Gas Turbine Degradation. [Final Year Project] (Unpublished)

Nasir, Faerah (2008) Adsorption of Zinc from Water by Coconut Coir Carbon. [Final Year Project] (Unpublished)

Ng, Chan Wai (2008) Study the Effects of Fluids Dominating Forces on Pseudo Relative Permeability Curve. [Final Year Project] (Unpublished)

Ng, Choon Hing (2008) The Effect of Increased Fuel Intake Temperature on the Performance of Internal Combustion Engines. [Final Year Project] (Unpublished)

Ng, Cheng Yee (2008) Parametric Study for the Critical Tubular Joint of the Jacket Structure. [Final Year Project] (Unpublished)

Ng, E-Laine (2008) FINGERPRINT RECOGNITION SYSTEM. [Final Year Project] (Unpublished)

Ng, Jiun Heui (2008) Comparison between ultimate pile capacity of bored piles determine using analytical method, numerical method and pile load test along Sentul - Batu Caves Double Track Project. [Final Year Project] (Unpublished)

Ng, Natasya Jia Weyn (2008) Compression Capacity Prediction of Cold-Formed Steel Sections. [Final Year Project] (Unpublished)

Ng , Jiun Huei (2008) Comparison between ultimate pilecapacity ofbored piles determine using analytical method, numerical method and pileloadtest along Sentul - Batu Caves Double Track Project. [Final Year Project] (Unpublished)

Ngadni, Norhidayah (2008) ANALYSIS OF KIKEH TRUSS SPAR SUBJECTED TO REGULAR WAVES. [Final Year Project] (Unpublished)

Ngadni, Norhidayah (2008) ANALYSIS OF KIKEH TRUSS SPAR SUBJECTED TO REGULAR WAVES. [Final Year Project] (Unpublished)

Ngatini, Maini Rizal (2008) Effects of Fiber Reinforcement in Intumescent Formulations for Char Strengthening. [Final Year Project] (Unpublished)

Ngo Dinh Phuong, Dinh Phuong (2008) Simulation and Performance Test of CNC Machining Center. [Final Year Project] (Unpublished)

Nor Asma Rusni Ab. Alim, Nor Asma Rusni (2008) A Study on the Effect of Surface Finish on Corrosion of Carbon Steel in CO2 Environment. [Final Year Project] (Unpublished)

Norafif Afnan Mohd Nordin, Norafif Afnan (2008) Effect of Deformation to the Performance of Aluminium Sacrificial Anode. [Final Year Project] (Unpublished)

Norfadliana bt. Mohd Rakbi, Norfadliana (2008) Interactive Learning System for E-commerce, Technopreneursip. [Final Year Project] (Unpublished)

Nur Hasyimah Bt Mohamad Afandi, Nur Hasyimah (2008) Study Of Zeolite In Mitigating Formation Damage Due To Inorganic Scaling. [Final Year Project] (Unpublished)

Nur Saidatul Shida Sahidi, Nur Saidatul Shida (2008) Organic Removal from Fertilizer Wastewater using Biological Treatment. [Final Year Project] (Unpublished)

Nur Syahadah binti Jamaludin, Nur Syahadah (2008) Fabrication of Pinion Gear for PowerWindow of a Car through Powder Metallurgy Technique. [Final Year Project] (Unpublished)

Nur Syazni binti Muhamad Nasrah, Nur Syazni (2008) State Variable Feedback Control Of A Gantry Crane. [Final Year Project] (Unpublished)

Nur Zahirah Binti Zakaria, Nur Zahirah (2008) Predesign of Latent Heat Thermal Energy Storage for UTP GDC System. [Final Year Project] (Unpublished)

Nur Zeenaida Muhammad Khiyar, Nur Zeenaida (2008) An Investigation on the Tribological Performance of Carbon nanotube(CNT) as a Lubricant Additive to Locally Made Engine Oil. [Final Year Project] (Unpublished)

Nurazrin binti Ismail, Nurazrin (2008) The Development of UTP Examination Timetabling System (ETS). [Final Year Project] (Unpublished)

Nurfariza Binti Mohd Zuki, Nurfariza (2008) Reducing Sway of Gantry Crane Load. [Final Year Project] (Unpublished)

Nurhusna Bt Yusoff , Nurhusna (2008) Design Calculations and Experimental Analysis of “Over Roof Solar Chimney”. [Final Year Project] (Unpublished)

Nurzaki Bin Ikhsan, Nurzaki (2008) Design and Analysis of a Hybrid Composite-Steel Frame Chassis for a Small Racecar. [Final Year Project] (Unpublished)

Nurzaki Bin Ikhsan, Nurzaki (2008) Design and Analysis of a Hybrid Composite-Steel Frame Chassis for a Small Racecar. [Final Year Project] (Unpublished)

O

Omar, Abdul Aziz (2008) E-Court Management System for Mahkamah Sesyen and Magistrate lpoh. [Final Year Project] (Unpublished)

Omar , Siti Aisyah (2008) Cooperative Control of Dual Series Robots. [Final Year Project] (Unpublished)

Ong, Chin K wang (2008) Optimization Of Well Location And Number Of Production Well. [Final Year Project] (Unpublished)

Osman, Robeatul Adawiah (2008) The Mechanical Properties ofMIRHA Foamed Concrete. [Final Year Project] (Unpublished)

Othman, Mohd Bazli (2008) Road Surveyor System Prototype. [Final Year Project] (Unpublished)

Othman, Nor Diana (2008) Feasibility Study ofThickness Measurement System. [Final Year Project] (Unpublished)

Othman Siru, Abdul Rahim (2008) Applying Information System in Healthcare Organization: A Case Study in Small and Medium Sizes of Clinics. [Final Year Project] (Unpublished)

P

PENJIYEV, AZAT (2008) APPLICATION OF FACTS DEVICES IN POWER SYSTEMS. [Final Year Project] (Unpublished)

Paputungan, Irving Vitra (2008) Recovery Model for Survivable System through Resource Reconfiguration. Masters thesis, Universiti Teknologi Petronas.

R

RAHMAN, ARIEF (2008) Agent-Based Simulation and Analysis of Human Behavior towards Evacuation Time Reduction. [Final Year Project] (Unpublished)

RAMLI, KHAlRUL.IKHWAN (2008) RFID SIMULATION IN MATLAB I SIMULINK. [Final Year Project] (Unpublished)

ROSHIDA HASSAN JAMIL, ROSHIDA (2008) Design of Experiment on Ultra Violet Curing Die Attach Film by Using Taguchi Method to Optimize Quality. [Final Year Project] (Unpublished)

Radzi, Mohd Zulkhairi (2008) Ping Pong Simulation. [Final Year Project] (Unpublished)

Rahiman, Raieza Hanim (2008) Investigation on Lost Circulation Materials (LCM) Derived From Dorian Peel Waste For Drilling Fluid Formulation. [Final Year Project] (Unpublished)

Rahman, Fauzan (2008) A Study on the Effect ofNozzle Type on the Hydrodynamics of Ejector-Induced Cocurrent Upflow Bubble Column. Masters thesis, Universiti Teknologi Petronas.

Rahmat Sam, Mohd Farid (2008) Application oflnfiltration Trench as a Community Retention Facility in Seri Iskandar. [Final Year Project] (Unpublished)

Rahmat Sam, Mohd Farid (2008) Application of lnfiltration Trench as a Community Retention Facility in Seri Iskandar. [Final Year Project] (Unpublished)

Raieza Hanim Rahiman, Raieza Hanim (2008) Investigation on Lost Circulation Materials (LCM) Derived From Durian Peel Waste For Drilling Fluid Formulation. [Final Year Project] (Unpublished)

Raja Faeez Shah Bin Raja Mudzaffar Shah, Raja Faeez Shah (2008) Design of A Steering Mounted Paddle Shifter for A Racing Car. [Final Year Project] (Unpublished)

Ramlan , Mohd Affendi (2008) Pull Out Tension Capacity of Self Compacting Concrete Containing Rice Husk Ash. [Final Year Project] (Unpublished)

Ramli, Mohd Raizullan (2008) Trip Generation Equation for Primary School. [Final Year Project] (Unpublished)

Ramly, Mohammad Zuhairi (2008) The Design and Fabrication of a prototype machine: "asam gelugor" processing machine. [Final Year Project] (Unpublished)

Razali, Amir Fadhli (2008) Monitoring the Dengue Population/Breeding ground using Geographie Information System (GIS) for the Dengue Mitigation Process. [Final Year Project] (Unpublished)

Razali, Fatin Nabilah (2008) EFFECT OF USED GROUND COPPER SLAG IN PROPERTIES OF CONCRETE DESIGN. [Final Year Project] (Unpublished)

Razali, Mohd Khairul Zaime (2008) DEVELOPMENT ANDPERFORMANCE TESTING OFONLINETEXT-BASED STRATEGY GAMES. [Final Year Project] (Unpublished)

Richard Lado Longwa Milla, Richard Lado (2008) Optimization of drilling hydraulics in vertical holes. [Final Year Project] (Unpublished)

Rosdi, Syarizatul Nadia (2008) Application of Solar Energy in Drying Pepper. [Final Year Project] (Unpublished)

Rosli, Mohd Firdaus (2008) CITY BUS CHARACTERISTICS:IPOH- TANJUNG RAMBUTAN. [Final Year Project] (Unpublished)

Rosli, Mohd Zaki AI Hafiz (2008) Mnltitask Anti-Dust Cleaner. [Final Year Project] (Unpublished)

Roslim, Muhammad Thaqif (2008) Experimental Study on Scale Control in Surface Pipelines by Magnetic Descaler. [Final Year Project] (Unpublished)

S

SALIM, MOHAMMAD RAZISW ADY (2008) Experimental Modeling ofthe Flow in the Furnace Top of an Ethane Cracker at EPEMSBPaka. [Final Year Project] (Unpublished)

SAN, THET (2008) 3D Virtual Tour For TAIPING Zoo. [Final Year Project] (Unpublished)

SHAIKH, IMTIAZ ALI (2008) DESIGN AND ANALYSIS OF SYNCHRONOUS DC-DC CONVERTER. [Final Year Project] (Unpublished)

SHUKOR, MOHD NOR AKMAL (2008) THE STUDY OF AIR FLOW MOVEMENT USING GAMBIT AND FLUENT SIMULATION (2D) PROGRAM FOR PASSIVE VENTILATION DESIGN CONCEPT OF LOW RISE BUILDING IN MALAYSIA. [Final Year Project] (Unpublished)

SOHAIMI, INTAN SURIA (2008) POWER MANAGEMENT AND POWER FACTOR CORRECTION OF A SINGLE PHASE INDUCTION MOTOR. [Final Year Project] (Unpublished)

Saaid, Ahmad Zaki (2008) Scrolling Shooter Game: Seed of Freedom Beta version. [Final Year Project] (Unpublished)

Sabri Hassan Assaari, Sabri Hassan (2008) Evaluation of Factors That Increase Ecommerce Website Conversion Rates. [Final Year Project] (Unpublished)

Sahidi, Nur Saidatul Shida (2008) Organic Removal from Fertilizer Wastewater using Biological Treatment. [Final Year Project] (Unpublished)

Saiedi, Hamed (2008) Static and Seismic Stability of the Largest Malaysian Sanitary Landfill. [Final Year Project] (Unpublished)

Saiful Aznan, Muhammad Zulhilmi (2008) Analysis on electrical power requirement of a hybrid solar-electric oven. [Final Year Project] (Unpublished)

Saiful Bahari, Siti Khadijah (2008) Effect of Class C Pulverized Fuel Ash on Shear Strength of Silty Sand Soil Type. [Final Year Project] (Unpublished)

Salleh, Adibah Bahriah (2008) Litter Rating and The Engineering Solution For Bandar Seri Iskandar. [Final Year Project] (Unpublished)

Salleh, Nor Safwan Amirul (2008) Nurse Knowledge Sharing Portal. [Final Year Project] (Unpublished)

Sani, Mohamad Ridzuan (2008) TARGET TRACKING SYSTEM USING ULTRASONIC SENSORS. [Final Year Project] (Unpublished)

Sasendera S/O Balamohan, Sasendera (2008) Feasibility of Oil-Palm Fronds for Biomass Gasification. [Final Year Project] (Unpublished)

Sebi @ Hasbi, Hasmi Saifuddin (2008) The Use of Marine Sand in Bituminous Mix•. [Final Year Project] (Unpublished)

Seow , Lee Lee (2008) Energy Recovery by Conversion of Thermal Energy of Flue Gases to Electricity. [Final Year Project] (Unpublished)

Serdar Halliyev, Halliyev (2008) Relative Permeability Hysteresis. [Final Year Project] (Unpublished)

Sha'ari, Asmawi (2008) SIMULATION OF SINTERING IN POWDER METALLURGY APPLICATION FOR FERROUS MATERIALS. [Final Year Project] (Unpublished)

Shafri, Muhammad llham Faez (2008) Peer to Peer Video Streaming Application. [Final Year Project] (Unpublished)

Shahary, Siti Ameera (2008) The Study of PoUutants Removal Efficiency in a Vegetated Swale System. [Final Year Project] (Unpublished)

Shakawi Efendy Jamaludin, Shakawi Efendy (2008) Study of the Use of Orifice as an Alternative for Steam Trap. [Final Year Project] (Unpublished)

Shri Subefamaniam, Mukuntha (2008) CLINIC MANAGEMENT SYSTEM. [Final Year Project] (Unpublished)

Sidek, Mohd Aziezie (2008) Automated Personality Inventory System. [Final Year Project] (Unpublished)

Sitha, Sam (2008) EFFECT OF SHEAR WALLS IN TALL BUILDING. [Final Year Project] (Unpublished)

Siti Fatimah binti Mazalan, Siti Fatimah (2008) Comparative Study of Different CO2 Injection Modes for Baronia RV2 Reservoir. [Final Year Project] (Unpublished)

Siti Khadijah Binti Saiful Bahari, Siti Khadijah (2008) Effect of Class C Pulverized Fuel Ash on Shear Strength of Silty Sand Soil Type. [Final Year Project] (Unpublished)

Siti Nur Hidayah Binti Mat Salleh, Siti Nur Hidayah (2008) The Effect of Multiple-use of Polystyrene Cups on Styrene Monomer Migration. [Final Year Project] (Unpublished)

Sobri, ohd Zulhairi (2008) Behavior of High Strength Concrete Containing Rice Husk Ash (RHA) and Superplasticizer. [Final Year Project] (Unpublished)

Sodana, Kiv (2008) RELATIONSHIP BETWEEN CUBE AND CYLINDER STRENGTHS FOR HIGH STRENGTH CONCRETE. [Final Year Project] (Unpublished)

Somhar@ Abdul Hamid, Salihah (2008) NPS MODELING OF SUNGAI PINANG CATCHMENT AREA & WATER QUALITY IMPROVEMENT BY USING BIORETENTION. [Final Year Project] (Unpublished)

Soraya Abd Rahman, Soraya (2008) A Study on Co-firing Empty Fruit Bunch (EFB) with Coal as Potential Fuel. [Final Year Project] (Unpublished)

Sufian Hardi Bin Yusof, Sufian Hardi (2008) Failure Analysis on Water Heater Tube. [Final Year Project] (Unpublished)

Suhaimi, Nor Ernie Akmal (2008) Characterization of Local Sands for Possible Use as Proppant. [Final Year Project] (Unpublished)

Sukur, Mohammad Ariff (2008) Mechanical and Microstructural Characterization of Hybrid Composite Developed By Compression Molding. [Final Year Project] (Unpublished)

Sulaiman, Mohd Amirul Hakim (2008) BANANA TRUNK AS A LOST CIRCULATION MATERIAL IN HYDROCARBON DRILLING FLUID. [Final Year Project] (Unpublished)

Sulong, Siti Nur Hanani (2008) Pull-out Tension and Flexural Capacity of Adhesively Jointed Steel Plates under Different Temperature. Masters thesis, Universiti Teknologi Petronas.

Sungsinlert, Anyamanee (2008) Assessing the outcome of Competencies Level from Knowledge-Based Project. [Final Year Project] (Unpublished)

Suriawani Bt Sulaiman, Suriawani (2008) Design of intake cooling system for Taurus 60 Gas Turbine Generator in UTP Gas District Cooling Plant using chilled water supply. [Final Year Project] (Unpublished)

Suriawani Sulaiman, Suriawani (2008) Design of intake cooling system for Taurus 60 Gas Turbine Generator in UTP Gas District Cooling Plant using chilled water supply. [Final Year Project] (Unpublished)

Syafri bin Mohd Yunus, Syafri (2008) Improvement of Oil and Water Separation in Three-Phase Conventional Separator Using Hydrocyclone Inlet Device. [Final Year Project] (Unpublished)

Syahidatulmazidah binti Ismail, Syahidatulmazidah (2008) Magnetic Properties and Corrosion Study on Bonded NdFeB Magnet Using Wet and Dry Binders. [Final Year Project] (Unpublished)

Syarizatul Nadia binti. Rosdi, Syarizatul (2008) Application of Solar Energy in Drying Pepper. [Final Year Project] (Unpublished)

Syed Osman, Syed Baharom Azahar (2008) Electroosmotic and Electrochemical Methods in Stabilizing Kaolinite Soil in Ground and Slope Conditions. PhD. thesis, Universiti Teknologi Petronas.

Syed Sultan, Syed Shahrhyl (2008) Natural Interaction Using Pinch Gloves. [Final Year Project] (Unpublished)

T

TAN , YINN HOONG (2008) A STUDY OF MECHANICAL ROBUSTNESS OF PORTABLE ELECTRONIC DEVICE SUBJECTED TO MECHANICAL DROP. [Final Year Project] (Unpublished)

Tamat, Mat Sahnizam (2008) Thickening of Municipal Sludge and Treatment of Leachate Using Recycled Ferrous Sulphate (RFS) Extracted from Groundwater Treatment Plant Sludge. [Final Year Project] (Unpublished)

Tan , Jason Min Chuan (2008) Evaluation and Modelling Residual Stress of a Joining - Sialon to Austenitic Stainless Steel. [Final Year Project] (Unpublished)

Tan , Min Chuan, Jason (2008) Evaluations and Modelling of Residual Stress of a joining- Sialon to Austenitic Stainless Steel. [Final Year Project] (Unpublished)

Tan , Shern Shiou (2008) 3D Spatial Sensor. [Final Year Project] (Unpublished)

Tan , Yinn Hoong (2008) A Study of Mechanical Robustness of Portable Electronic Device Subjected to Mechanical Drop. [Final Year Project] (Unpublished)

Taufi Qil Hafiz Bin Mohd Tahar, Taufi Qil Hafiz (2008) Modelling and Analysis of a Car Bumper. [Final Year Project] (Unpublished)

Teh, Choon Chi (2008) Study on Characterisation and Property of Local Sand. [Final Year Project] (Unpublished)

Temizi, Mohd Zulhafiz (2008) Universiti Teknologi Petronas Virtual FYP Communities An Online Knowledge Sharing and Resource Centre. [Final Year Project] (Unpublished)

Tengku Hamzah, Tengku Anis Amalina (2008) The Effect of Different Filler Materials and Gradation on the eharacteristics of Bituminous Mixture. [Final Year Project] (Unpublished)

Thaha, Hendrayana (2008) Development of Multi-Walled Carbon Nanotubes Film for Ionization based Gas Sensing Application. Masters thesis, Universiti Teknologi Petronas.

Thaweesak Hemchi, Thaweesak (2008) Thermal stress and Thermal expansion in a brake drum of heavy commercial truck. [Final Year Project] (Unpublished)

Thembinkosi Robert Khumalo, Robert Khumalo (2008) Analytical and CFD Simulation of an on-roof Wind Generator Using Biomass. [Final Year Project] (Unpublished)

Ton Mohamad, Mohamad Ihsan (2008) Automated Clothesline System. [Final Year Project] (Unpublished)

Tuan Mohammad, Tengku Mohd Saifuddin (2008) SENSITIVITY STUDY OF ENVIRONMENTAL FORCES ON JACKET OFFSHORE STRUCTURE. [Final Year Project] (Unpublished)

Tuan Nur Aiman Bin Tuan Kamaruddin, Tuan Nur Aiman (2008) Investigation of the Effect of Exhaust Middle Pipe Length to the Engine Performance. [Final Year Project] (Unpublished)

V

Vu, Phuong Anh (2008) Softness Metric for Furniture Virtual Shopping. [Final Year Project] (Unpublished)

W

WAE-ESOR, JETSRAPHORN (2008) RFID REAL TIME TRACKER. [Final Year Project] (Unpublished)

Wahab, Ahmadnizam (2008) CLICKLESS MOUSE INTERACTIVITY FOR TOURISM WEBSITE. [Final Year Project] (Unpublished)

Wan Ahmad Fuad Ali bin Wan Abd Ghafar, Wan Ahmad Fuad Ali (2008) Comparison of Methods to Reduce Grid Orientation Effect in Miscible Flood Simulation. [Final Year Project] (Unpublished)

Wan Amalina Wan Zaharuddin, Wan Amalina (2008) Study on the Integrity of the Intumescent Bonding to the Steel Substrate before Fire Exposure. [Final Year Project] (Unpublished)

Wan Chek, Mohd Najib (2008) ANALYSIS OF COASTAL EROSION AT MIRI CRUDE OIL TERMINAL. [Final Year Project] (Unpublished)

Wan Ibrahim, Wan Mohd Syazwan (2008) RELIABIUTY PREDICTION AND MODELING: A Case Study ofDry Gas Seal and Buffer Gas System on Compressor for Gas Transportation. [Final Year Project] (Unpublished)

Wan Ismail, Che Wan Mohd Hafizul Azizi (2008) Design and Analysis of a Drive Train System for a Small Race Car. [Final Year Project] (Unpublished)

Wan Mazlan, Wan Mohd Safwan (2008) Development of an External Laptop Cooler with Thermoelectric Device. [Final Year Project] (Unpublished)

Wan Mazlan, Wan Muhamad Muhsin (2008) INVENTORY MANAGEMENT AND ASSET TRACKING SYSTEM FOR SOLUTION ASSESSMENT & DEVELOPMENT CENTRE (SADC). [Final Year Project] (Unpublished)

Wan Mohd Syazwan Bin Wan Ibrahim, Wan Mohd Syazwan (2008) Reliability Prediction And Modeling: A Case Study Of Dry Gas Seal And Buffer Gas System On Compressor For Gas Transportation. [Final Year Project] (Unpublished)

Wan Mohd Syazwan Bin Wan Ibrahim, Wan Mohd Syazwan (2008) Reliability Prediction And Modeling: A Case Study Of Dry Gas Seal And Buffer Gas System On Compressor For Gas Transportation. [Final Year Project] (Unpublished)

Wong , Chun Wah (2008) Comparison between Ultimate Pile Capacity of Bored Piles Determine Using Analytical method, Numerical Method and Pile Load Test At Puncak Alam, Project UiTM. [Final Year Project] (Unpublished)

Wong , Chung Hoong (2008) Study of Drop Impact Resistance on Fiber Reinforced Composite Plates. [Final Year Project] (Unpublished)

Y

Y ahaya, Mohd Roziee (2008) Effect of Used Engine Oil to High Strength Microwave Incinerated Rice Husk Ash (MIRRA) Concrete. [Final Year Project] (Unpublished)

YAHYA, MURNI (2008) AN IMPROVED ELECTRONIC BALLAST FOR FLUORESCENT LAMP. [Final Year Project] (Unpublished)

Yaacob, Aizuddin Faiz (2008) SOIL IMPROVEMENT ON MINING SAND USING PULVERIZED FUEL ASH (PFA) WITH LIME ADDITIVE. [Final Year Project] (Unpublished)

Yusheila Bt Md Yunus, Yusheila (2008) Hybrid Solar Dryer with Biomass Integration. [Final Year Project] (Unpublished)

Yusoff, Nurul Liza (2008) Virtual Learning Space for Kindergarten. [Final Year Project] (Unpublished)

Yusop, Siti Haida (2008) Removal of Copper and Cadmium from Aqueous Solution by Adsorption on Coconut Coir Carbon. [Final Year Project] (Unpublished)

Z

ZUKAINAIN, MD UZAIR FIDAIY (2008) THE EFFECT OF MICROWAVE INCINERATED RICE HUSK ASH ON THE STRENGTH OF FLOATING FOAMED MORTAR. [Final Year Project] (Unpublished)

Zadeh Mahabadi, Sayed AH Kasaei (2008) Real-Time Stereopsis. [Final Year Project] (Unpublished)

Zainal, Mazby Zubir Khairul Nazri (2008) Study of Value Engineering Implementation Among Contractors In Malaysia. [Final Year Project] (Unpublished)

Zainalabidin, Muhammad Aizuddin (2008) MISCIBLE C02 INJECTION: SENSITIVITY TO FLUID PROPERTIES TINGGI FIELD. [Final Year Project] (Unpublished)

Zairul A'ziya bt Zullekfli, Zairul A'ziya (2008) Development of a Database for Precast Works' Production Rates. [Final Year Project] (Unpublished)

Zakaria, Ariff Ezwan (2008) Sintering Carbon Nanotubes Reinforced Copper Powder Using Different Particle. [Final Year Project] (Unpublished)

Zakaria, F athiah (2008) Analysis ofHigb Frequency Transformer Design in Converter Application. [Final Year Project] (Unpublished)

Zakaria, Nor Salwanie (2008) COMPILATION OF DESIGN METHODOLOGY FOR SOIL NAILING. [Final Year Project] (Unpublished)

Zamri, Ahmad Fairus (2008) Analysis of Jet Fire on IntumescentCoating Applied on SteelSubstrate. [Final Year Project] (Unpublished)

Zarizambri Bin Ahmad, Zarizambri (2008) Design and Analysis of a Pedal Box System for a small Race-car. [Final Year Project] (Unpublished)

Zatul Iffah Bt Mohd Nor, Zatul Iffah (2008) Alternative Solution to Sand Blanket in Vertical Drain. [Final Year Project] (Unpublished)

Zazali, Mardhia (2008) AJAX Based Online Shopping Application. [Final Year Project] (Unpublished)

Zul Hilmi bin Awang, Zul Hilmi (2008) Investigation The Tribological Properties of Fiber Composite Material Reinforced With Carbon Nano Tube(CNT). [Final Year Project] (Unpublished)

Zul Hisham, Fatin Liana (2008) Effect of Used Engine Oil to High Strength Microwave Incinerated Rice Husk Ash (MIRHA) Concrete. [Final Year Project] (Unpublished)

Zul Hisham, Fatin Liana (2008) Effect of Used Engine Oil to High Strength Microwave Incinerated Rice Husk Ash (MIRRA) Concrete. [Final Year Project] (Unpublished)

Zulfan Adi Putra, Zulfan (2008) A Two-Step Optimization Approach for Retrofit of Water Network System. Masters thesis, Universiti Teknologi Petronas.

Zulkifli, Ahmad Yazid (2008) Municipal Wastewater Treatment by Sequencing Batch Reactor. [Final Year Project] (Unpublished)

Zullekfli, Zairul A'ziya (2008) Development of a Database for Precast Works9 Production Rates. [Final Year Project] (Unpublished)

Zuraini Hanim Binti Zaini, Zuraini Hanim (2008) Assessing User Acceptance on Competencies Level Assessment System using Technology Acceptance Model. [Final Year Project] (Unpublished)